2.4G RF Remote Control
1. Size: 110*52*20mm
2. Power: AAA battery*2pcs (Without Battery)
4. Fabrication: Multicolor printing & UV varnish
RGB LED Controller
1. Size: 85*45*23mm
2. Working voltage: DC12-24V
3. Control Way: R G B three channels
4. Max load per channer:6A
5. Output connection: Common anode
6. Telecontrol distance: 30 meters
7. Programs: 20 kinds
1. Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be broken.
2. Please don't connect wires with power on. Please switch on again only when it is in right connection and no short circuit.
3. Please keep your finger off the touch ring when installing the batteries, to improve its sensitivity, and use the remote (3 seconds later) after the batteries are installed. Please reinstall the batteries, if the touch ring is found low-sensitivity.
4. Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.
1 x LED RGB Controller
1 x 2.4G RF Remote Control( Not included battery)